¶ Introduction
Our digital multimeters are great for general testing and troubleshooting of your electronic circuits.
A picture of our oscilloscope
¶ Recommended Uses
These are great for general purpose testing and troubleshooting of your electronic circuits as they can measure voltage, resistance, continuity, etc.
¶ Specifications
Induction Class: Green Tool (No Induction Required)
Model: Siglent SDS 1102DL+
Channels: 2
Bandwidth: 100MHz
Sample Rate: 500 MSa/s
USB Recording: Yes
¶ Induction Process
No induction required.
However, we do offer an electronics workshop for a complete introduction to electronics, including oscilloscopes.
https://brisbanemaker.space/classes/
¶ How To Operate
Note: never play with electricity unless you know what you are doing. Even at low voltages you can still receive a shock! Never measure mains voltages unless you are a qualified electrician.
¶ Before Use
- Insert the probe into one of the channels.
- Attach the probe to the parts of your circuit that you want to measure.
- Select the blue "Auto" button to automatically detect and zoom into a signal.
¶ During Use
- Do not push too hard, but a solid connection is required for an accurate reading.
- Adjust the signal being displayed using the knobs.
¶ After Use
- Turn off, then place the probe back on top.