Our Adventurer 4 is a mid size, highly capable machine. It's enclosed print area and two nozzle choices make it ideal for printing high quality ABS prints without warping.
You've found the secret code for our competition! The code is "#makesomethingamazing".
A picture of our adventurer 4
Our Adventurer 4 can be used for printing many different objects. It's setup to print with ABS or PLA which gives a great surface finish, and strong, structurally sound parts. Use it for printing brackets, enclosures and other small parts. For faster and cheaper prints, swap out the standard 0.4mm nozzle for a 0.6mm nozzle. You can also print high temperature filaments like ABS, PLA, PC, PETG, PLA-CF or PETG-CF. Note that we only keep ABS and PLA in stock, BYO for other filament types.
Usage Cost: $2/hr (50% discount for BYO filament, see staff)
Induction Class: Orange Tool (Induction Required)
Print Area: 220mm(L) x 200mm(W) x 250mm(H)
Nozzle Sizes: 0.4mm / 0.6mm
Max Nozzle Temp: 240°C / 265°C
Layer Heights: 0.1mm - 0.3mm / 0.1mm - 0.45mm
Max Bed Temp: 110°C
Supported Filaments: ABS, PLA, PC, PETG, PLA-CF & PETG-CF
This induction has one part:
Attend our introductory 3D printing class for a complete introduction. https://brisbanemaker.space/classes/
You should be familiar with how to operate this tool after completing an induction. However, a quick reference guide is included below to assist you.
Warning: the heated bed and hot end can become extremely hot and result in severe burns if touched.
PLA, then select the "standard" print profile.
We try to keep the following filaments in stock for members to use but check with staff ahead of time if you need something specific. Filament is included in the hourly machine cost. We recommend using these unless you have a special need, as they've been chosen to work well with our machines and have calibrated profiles. If you'd like to suggest other filaments to stock, please let us know.